The AM Forum
December 05, 2024, 02:18:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Shack Considerations  (Read 25441 times)
0 Members and 1 Guest are viewing this topic.
WA1GFZ
Member

Offline Offline

Posts: 11151



« Reply #25 on: October 04, 2007, 08:02:44 PM »

I've set up a number of labs including my shack and every time I put a bench against a wall I learned to hate it. Far better to have the small end against the wall so you can get behind the equipment.
Logged
KA8WTK
Contributing
Member
*
Offline Offline

Posts: 873



« Reply #26 on: October 04, 2007, 08:53:01 PM »

1: Seperate building with 220, water, sewer, heat, air conditioning and a dehumidifier.
2: LOTS of light when you need it, ability to have less light when you don't.
3: A bathroom. (Wife won't let me put one out here. Says she'll never see me again)
4: A cat. Good company, warm lap in the winter and no mice in behind rack transmitters.
5: Beer frig.
6: Ceiling fan - Helps to circulate the air - makes building more comfortable.
7: Intercom or message lights. I have intercom - I would ignore a light or just not see it.
8: Lots of outlets. (I need to add more)
9: Master kill switch. Most of the stuff here is on one.
10: A bigger building
11: fire extinguisher

I have all but #3 and wish for #10. It seems like your collection of radios, parts and service equipment will fill all the available space and leave you wishing for more. Another good thing about the cat; I like my cat. I would not like to see him get killed by any HV or 120 that could be left exposed. I figure if I make things safe enough that I don't have to worry about him reaching into a rig or enclosure with the voltage on, I have it pretty well sealed up so I can't stick my fingers in there either. By watching out for him I also protect myself.

Good ideas and a good discussion!
Logged

Bill KA8WTK
W1EUJ
Guest
« Reply #27 on: October 04, 2007, 10:19:24 PM »

>1: Seperate building with 220, water, sewer, heat, air conditioning and a dehumidifier.
>3: A bathroom. (Wife won't let me put one out here. Says she'll never see me again)
>10: A bigger building

Hey, you mean a seperate house for a hobby? It was difficult enough to get one house here!

I'd hate to walk or shovel the inevitable snow. Or be too far from the yl. I'd personally stick to the shack in the basement.

Still, lots of good suggestions. As the thread tails off, I'll compile a list for myself, and for the website. Perhaps I'll even post the occasional photo of the work on the room. I've got other projects in my new home, so I think this lab construction will be a little limited. I will be needing high current 120 for the BC-610.

Thanks all.

Dave Goncalves
W1EUJ
Logged
WD8BIL
Contributing
Member
*
Offline Offline

Posts: 4413


« Reply #28 on: October 05, 2007, 07:32:13 AM »

Whatever you do David, make sure you can hear the receiver from the 'fridge and bathroom. You'll be all set to handle the calls of nature without missing that all important 'ol buzzard goin on !

Logged
W1EUJ
Guest
« Reply #29 on: October 05, 2007, 10:25:22 AM »

You know how some resturants have speakers in the bathroom? I think I'll do the same. Good suggestion:

- Audio system covering the food input and output locations
Logged
KB2WIG
Contributing
Member
*
Offline Offline

Posts: 4468



« Reply #30 on: October 05, 2007, 11:00:07 AM »

 I'll listen to you on the outside speaker.   klc
Logged

What? Me worry?
Carl WA1KPD
Contributing
Member
*
Offline Offline

Posts: 1651



« Reply #31 on: October 05, 2007, 11:03:41 AM »

"And will be listening in the crapper room speaker"........
Logged

Carl

"Okay, gang are you ready to play radio? Are you ready to shuffle off the mortal coil of mediocrity? I am if you are." Shepherd
Steve - WB3HUZ
Guest
« Reply #32 on: October 05, 2007, 11:19:45 AM »

Or get yourself a wireless mic with IFB and you can continue to participate in the QSO while on the crapper. How sweet is that?


Whatever you do David, make sure you can hear the receiver from the 'fridge and bathroom. You'll be all set to handle the calls of nature without missing that all important 'ol buzzard goin on !


Logged
W1EUJ
Guest
« Reply #33 on: October 05, 2007, 11:25:00 AM »

Wall-mounted boom mic, right next to the can. That's dedication!

Didn't broadcast radio start in hotel bathrooms draped with velvet?
Logged
Todd, KA1KAQ
Administrator
Member

Offline Offline

Posts: 4244


AMbassador


« Reply #34 on: October 05, 2007, 11:26:26 AM »

Or get yourself a wireless mic with IFB and you can continue to participate in the QSO while on the crapper. How sweet is that?

Better than having a Mason jar next to the mic, or at least - easier.  Wink
Logged

known as The Voice of Vermont in a previous life
k4kyv
Contributing Member
Don
Member

Offline Offline

Posts: 10037



« Reply #35 on: October 05, 2007, 01:46:09 PM »

I'm still stripping paint on my shack, hoping to beat winter wx in time to complete the paint job.  So far, dry scraping, an infra-red heat gadget, pressure washer and chemical stripper.  No matter what, a slow-going PITA to remove 75 years of old paint.
Logged

Don, K4KYV                                       AMI#5
Licensed since 1959 and not happy to be back on AM...    Never got off AM in the first place.

- - -
This message was typed using the DVORAK keyboard layout.
http://www.mwbrooks.com/dvorak
The Slab Bacon
Member

Offline Offline

Posts: 3929



« Reply #36 on: October 05, 2007, 02:25:13 PM »

Better than having a Mason jar next to the mic, or at least - easier.  Wink

that could be extreemly nasty if one mistook the "mason jar" for their cup of coffee (or other favorite beverage) while making an
"Old buzzard"!! Shocked Shocked
Logged

"No is not an answer and failure is not an option!"
Steve - WB3HUZ
Guest
« Reply #37 on: October 05, 2007, 02:25:44 PM »

Watch out for the lead in that paint!


I'm still stripping paint on my shack, hoping to beat winter wx in time to complete the paint job.  So far, dry scraping, an infra-red heat gadget, pressure washer and chemical stripper.  No matter what, a slow-going PITA to remove 75 years of old paint.
Logged
N3DRB The Derb
Guest
« Reply #38 on: October 05, 2007, 02:42:24 PM »

I'm not too crazed about the wireless mike in the can idea. Although it COULD lead to hilarious frivolity in the #2 blastage dept.  Tongue
Logged
W1RKW
Contributing
Member
*
Offline Offline

Posts: 4423



« Reply #39 on: October 05, 2007, 02:49:13 PM »

Don't be like me and put your operating position where water can get to it from overhead plumbing.  In my case, see: http://amfone.net/Amforum/index.php?topic=11985.0
My fault for not doing my homework on my plumbing.
Logged

Bob
W1RKW
Home of GORT.
The Slab Bacon
Member

Offline Offline

Posts: 3929



« Reply #40 on: October 05, 2007, 02:50:21 PM »

Operation from in the can may create a new type of operating.

Instead of operation portable, one would be operating potable Shocked Shocked
Logged

"No is not an answer and failure is not an option!"
ve6pg
Member

Offline Offline

Posts: 1108



« Reply #41 on: October 06, 2007, 10:04:31 AM »

...just finished moving my stuff, down the hall...ceiling fan, large windows, and walls/ceiling painted bright white. best thing for light reflection. dont forget wiring for grounds, counterpoises, etc...tim...sk..
Logged

...Yes, my name is Tim Smith...sk..
kc4yoy
Guest
« Reply #42 on: October 06, 2007, 01:30:18 PM »

You know how some resturants have speakers in the bathroom? I think I'll do the same. Good suggestion:- Audio system covering the food input and output locations


I have a Radio Shack baby monitor I bought when my dad was sick and bed ridden
so that mom could hear him from the kitchen. After he died I brought it home.
It sat in a box for several years until I ran across it again and had the bright
idea to put the transmitter in the shack. It's on 49 MHz and covers the property
really well. I've since found another one at a ham fest so I have 2 receivers,
I have one in the little workshop off the display room
http://radioheaven.homestead.com/minishop.html
 and one in the garage workshop.
My wife knows if she needs me she just call to me near the office/shack
and I'll hear her if I'm in either work shop.

Keep in mind that if you do use one of these, the mics are VERY sensitive,
they'll pick up several rooms away. My monitor transmitter in on a switched outlet
strip that's only on when I want i on, don't want some neighbor with a scanner
listening to everything that goes on it the house... hi hi

73, Ron
Logged
ve6pg
Member

Offline Offline

Posts: 1108



« Reply #43 on: October 06, 2007, 06:04:45 PM »

...baby monitors are the best...i've used them fer years...the receiving one is portable, using a 9v battery...has a LED  bar s-meter, so it can been seen from a distance...started using it so i would'nt miss 6 metre openings...tx in the shack, portable in the werkshop...sk..
Logged

...Yes, my name is Tim Smith...sk..
Steve - WB3HUZ
Guest
« Reply #44 on: October 06, 2007, 06:36:45 PM »

John, K1DEU has some info on his website than shows how to use a cordless telephone for two way comms with the station. Use the 900, 2400 or 5800 spread spectrum models and you don't need to worry about your neighbors listening in. Those 49 MHz FM units can be heard miles away, in some cases. Or so I've read.... Wink
Logged
KB2WIG
Contributing
Member
*
Offline Offline

Posts: 4468



« Reply #45 on: October 06, 2007, 07:35:26 PM »

The wireless phone we use has spred spectrum and an operating  F around 2 Ghz.. push a button in intercom mode and she starts to a beepin' 

living in the city years back, I listened in to several different households on the 49 Mc "baby band"

Back in the early 80's I copied a phone call from someone in Va on the 160m band. This blew my mind ---


    klc
Logged

What? Me worry?
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.127 seconds with 19 queries.