The funny looking deck to the left with the movable spring contacts is the cap bank <etc.> You have some cleaning and lubing to do Al. Pull the tubes first. Does your set have the original connector? If so you should be in better shape than I as far as artistic conversion goes.
I noticed looking at the manual - which I now have in PDF, that the Modulation transformer is 5700 to 2280 Ohms. So my TCS mod iron being 6K:6K will not be ideal. It would be fine for a pair of 807's modulating a single 807; not two in parallel. It is however ideal as a driver transformer, although a bit large.
Mike
OK on the "funny looking deck." No, I do not have the original connector. I don't anyone does if it was ever put on the air. That connector is impossible to find. I'd like to bring it over some time and we can do a little looking and suggesting. Did you check your email? I send you some more detailed pics. Gotta find that schematic that one of my handbooks had on what looks like a perfect fit for mod / ps
On the lubing: I have some Lubraplate and other oils that may work. Need your expert suggestion.
Al