The AM Forum
March 19, 2024, 01:39:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Scuffed and Chipped Trim? Go to your local auto dealership...  (Read 5880 times)
0 Members and 1 Guest are viewing this topic.
W1EUJ
Guest
« on: January 08, 2009, 07:13:13 PM »

I have a Drake 2A and 2AQ, in very fine shape. But the front trim rings were nicked and chipped, making them a little more shopworn rather than restored!

You can't use a Sharpie; that leaves an irridescent violet color on the satin black finish. Making satin black out of a mix of gloss and flat model paint is almost impossible!

Go to you auto dealership, and go to the parts department (I went to my VW dealer). Ask for a black paint touch-up kit. You get two pens - one black, the other clear coat. Find a warm spot at home, and store them cap-side-down for a while. Then, just mark away the blemishes with the black pen, and let dry. If you are working on a gloss finish, apply the clear coat pen next. Done!

Other colors should work the same; I'm not holding my breath on HW-101 case colored touchup paint, though.
 
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.065 seconds with 16 queries.