The AM Forum
December 04, 2024, 08:01:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: WELL WENT DRY...BUT GROUND SYSTEM...!  (Read 2782 times)
0 Members and 1 Guest are viewing this topic.
ve6pg
Member

Offline Offline

Posts: 1108



« on: September 06, 2007, 03:04:50 PM »

...hi from tim..
 i live in the sticks, and with this summer of little rain, my well went dry...it is a dug well, with concrete casings, and had to go down there to install a 5ft sand point...lots of water now, and while i was down there, i installed 6 ground rods, all fed in parallel.. the system ties into all my ground system, and my ground current is way up...just a thought for those who are/will be servicing their wells....sk..
Logged

...Yes, my name is Tim Smith...sk..
WA1GFZ
Member

Online Online

Posts: 11151



« Reply #1 on: September 06, 2007, 03:59:34 PM »

Wow you can still buy a point I want to do the same thing in the front yard. Water is only down about 5 feet. I would not do that with a pump in the hole sharing rods....
Logged
flintstone mop
Contributing
Member
*
Offline Offline

Posts: 5048


« Reply #2 on: September 07, 2007, 11:43:36 AM »

I have heard that if your SWR points change with dry and wet condx, then the radial system needs more wire to be laid out.
Fred
Logged

Fred KC4MOP
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.045 seconds with 19 queries.