The AM Forum
April 16, 2024, 09:53:36 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Heathkit DX-60 WC3K MODS  (Read 29333 times)
0 Members and 1 Guest are viewing this topic.
n8yhy
Guest
« on: July 29, 2005, 07:45:54 PM »
Hello i was wondering if any one has performed the carrier mod on a DX-60? And if so could someone help with a little more info on this modification? The Link to the mod and the schematic is listed below..Thanks Chris N8YHY..

http://www.amwindow.org/tech/htm/wc3kmods.htm


My Boat Anchors
http://n8yhy.tripod.com
Logged
Steve - WB3HUZ
Guest
« Reply #1 on: September 03, 2005, 02:54:55 AM »
What info do you desire?
Logged
N2udf
Guest
« Reply #2 on: September 07, 2005, 06:26:08 AM »
I have done these mods,and they work quite nicely..Lee,N2UDF
Logged
kx9dk
Member

Offline Offline

Posts: 27



WWW
« Reply #3 on: October 16, 2005, 07:37:34 PM »
I have a question on the carrier control pot used in the mod. Is that supposed to be 50 or 50K ohms? The reason I ask is because the original circuit has a 33k resistor from the cathode to ground. I've got an old DX-60B that I'd like to bring back to life.

http://www.amwindow.org/tech/htm/wc3kmods.htm

Dave
KX9DK
Logged
KX9DK
Dave - Milwaukee, Wisconsin

Licensed since 1965 - Original Call WA8RFH, Cleveland OH
KX5JT
Contributing
Member
*
Offline Offline

Posts: 1954


John-O-Phonic
« Reply #4 on: December 21, 2009, 06:50:55 AM »
It's definitely 50K ohms.  Typo but seems obvious enough.
Logged
AMI#1684
Pages: [1]   Go Up
  Print  
The AM Forum  > AMfone's Online AM Handbook > Transmitters > Topic: Heathkit DX-60 WC3K MODS
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.034 seconds with 18 queries.