|
Title: Heathkit DX-60 WC3K MODS Post by: n8yhy on July 29, 2005, 07:45:54 PM Hello i was wondering if any one has performed the carrier mod on a DX-60? And if so could someone help with a little more info on this modification? The Link to the mod and the schematic is listed below..Thanks Chris N8YHY..
http://www.amwindow.org/tech/htm/wc3kmods.htm My Boat Anchors http://n8yhy.tripod.com Title: Re: Heathkit DX-60 WC3K MODS Post by: Steve - WB3HUZ on September 03, 2005, 02:54:55 AM What info do you desire?
Title: Re: Heathkit DX-60 WC3K MODS Post by: N2udf on September 07, 2005, 06:26:08 AM I have done these mods,and they work quite nicely..Lee,N2UDF
Title: Re: Heathkit DX-60 WC3K MODS Post by: kx9dk on October 16, 2005, 07:37:34 PM I have a question on the carrier control pot used in the mod. Is that supposed to be 50 or 50K ohms? The reason I ask is because the original circuit has a 33k resistor from the cathode to ground. I've got an old DX-60B that I'd like to bring back to life.
http://www.amwindow.org/tech/htm/wc3kmods.htm Dave KX9DK Title: Re: Heathkit DX-60 WC3K MODS Post by: KX5JT on December 21, 2009, 06:50:55 AM It's definitely 50K ohms. Typo but seems obvious enough. AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
|