The AM Forum
December 09, 2024, 06:06:59 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cleaning a dirty chassis  (Read 20346 times)
0 Members and 1 Guest are viewing this topic.
Todd, KA1KAQ
Administrator
Member

Offline Offline

Posts: 4244


AMbassador


« on: June 22, 2005, 11:16:00 AM »

One of the most rewarding parts of using old gear for me is the restoration process. I'm not a concours-collector-minded type, but a clean piece of old gear is a sight to behold. It's almost like stepping back in time to the day when the new owner put the piece of gear on the air for the first time.

Getting a dirty chassis clean can be a pretty big challenge. Over the years I've found some little tricks that work fairly well and might not seem all that obvious.

Before starting with any cleaning solutions, I usually try to blow off the chassis first with a compressor. This removes a lot of crap that would otherwise turn into mud as soon as you apply cleaner. If you have a large compressor, be careful as a strong blast of air can actually do damage. Even my small compressor is capable of this. To aid in the removal of loose dirt, try using a variety of soft paint brushes to loosen the dirt.

When it's time to move on to the cleaning fluid part (Windex, soap and water, whatever flicks yer switch), put away the paint brushes and try an old toothbrush. And for those really tough, deep areas between transformers, IF cans, or whatever else - those gray sponge disposable paint brushes work great. I use the small size for most applications. They are bevel-cut at the bottom and also have a stiff piece of plastic inside to lend shape and support. This is handy for getting into cracks and cervices, but be careful. As the sponge wears away, the plastic can become exposed and is capable of marring aluminum. Q-Tips work well for the areas you can easily reach, and most drug stores have the long, wooden swab version for deeper places.

I'm not a fan of the dishwasher or hose approach for anything but the most extreme cases where you really have nothing to lose and everything to gain. But I do try to rinse the areas cleaned before drying the chassis in the sun or with some source of heat. Be careful of getting liquids into transformers and coils, of course.

There are plenty of other tools for certain situations. #0000 steel wool is good for polishing away surface damage, but should be used with care or you can do more damage than good. Same thing applies to cleaners, of course. I reserve use of 409, Fantastick, or other heavy duty cleaners for extreme cases as they almost always remove the luster of paint, if not the paint itself.

I'm probably preaching to the choir here, but maybe someone will find a tip in there that will help out in a restoration. Even better, I hope to see more helpful comments that I can learn from as well. Cheesy

~ Todd,  KA1KAQ
Logged

known as The Voice of Vermont in a previous life
k4kyv
Contributing Member
Don
Member

Offline Offline

Posts: 10037



« Reply #1 on: June 23, 2005, 02:26:05 AM »

Quote from: Todd, KA1KAQ
I reserve use of 409, Fantastick, or other heavy duty cleaners for extreme cases as they almost always remove the luster of paint, if not the paint itself.


They also remove the lustre of bakelite, and it can never be fully restored.  It dissolves  the "skin" of the phenolic, exposing to the surface the filler, which may be anything from powdered mica to plain ol' wood sawdust.
Logged

Don, K4KYV                                       AMI#5
Licensed since 1959 and not happy to be back on AM...    Never got off AM in the first place.

- - -
This message was typed using the DVORAK keyboard layout.
http://www.mwbrooks.com/dvorak
w3jn
Johnny Novice
Administrator
Member

Offline Offline

Posts: 4612



« Reply #2 on: June 23, 2005, 06:51:54 AM »

Don, see my post on this subject:
http://amfone.net/Amforum/index.php?topic=4883

I agree it probably can never be *fully* restored, but you can get awfully close.

73 John
Logged

FCC:  "The record is devoid of a demonstrated nexus between Morse code proficiency and on-the-air conduct."
Todd, KA1KAQ
Administrator
Member

Offline Offline

Posts: 4244


AMbassador


« Reply #3 on: June 23, 2005, 01:21:33 PM »

John -

I wonder if you could polish bakelite back to a decent level as you outlined, then spray it with a decent, durable clearcoat? Obviously the surface would have to take the coating, so any residue could prevent this. Overspraying after simply cleaning and removing the coating would yield shiney crap-brownish black knobs, though. I recall reading an article in ER (I think) some years back about a guy who used black shoe polish and a buffing wheel.

Somewhere amongst the piles of 'stuff' I'm sure there are some borken old knobs to experiment on. If I don't find time for it in the next year(or month), would anyone else care to try?
Logged

known as The Voice of Vermont in a previous life
W2WDX
Guest
« Reply #4 on: September 11, 2011, 01:38:03 AM »

The only method that I have used and do not recommend is a kiln method using a programmable ceramics kiln. You must gradually heat the bakelite piece to nearly its surfaces melting point, then very gradually cool it down. You must watch it continuously and you can certainly destroy the piece very easily.

Not recommended.
Logged
K1JJ
Contributing
Member
*
Offline Offline

Posts: 8886


"Let's go kayaking, Tommy!" - Yaz


« Reply #5 on: September 11, 2011, 11:55:10 AM »

Fantastic!

Back in 1966 I acquired a used HT-37 and cleaned it up like any good JN would. Using Fantasdick, (or was it 409?)  I started cleaning the panel meter. After 30 seconds the plastic lens cover turned a frosted white and I could barely see the meter needle. The cleaning solution literally melted the surface of the plastic!  I couldn't believe this was happening - like a ham nightmare.

Later, I carefully sanded the meter cover with fine sandpaper and then polished it. The meter still looked slightly frosted and barely readable.

A few months later I traded the rig in. No one noticed the fogged meter at the ham store. Somewhere out there there's a slightly frosted HT-37.. Embarrassed

T
 
Logged

Use an "AM Courtesy Filter" to limit transmit audio bandwidth  +-4.5 KHz, +-6.0 KHz or +-8.0 KHz when needed.  Easily done in DSP.

Wise Words : "I'm as old as I've ever been... and I'm as young as I'll ever be."

There's nothing like an old dog.
W7TFO
WTF-OVER in 7 land Dennis
Contributing
Member
*
Offline Offline

Posts: 2496


IN A TRIODE NO ONE CAN HEAR YOUR SCREEN


WWW
« Reply #6 on: September 11, 2011, 01:06:28 PM »

Using Fantasdick, (or was it 409?)  I started cleaning the panel meter. After 30 seconds the plastic lens cover turned a frosted white and I could barely see the meter needle. The cleaning solution literally melted the surface of the plastic!  I couldn't believe this was happening - like a ham nightmare.

Yep, clear plastics are very susceptible to surface corruption from a lot of solvents used in 'cleaners'.

Rather I always try and polish them out with Meguairs' plastic polish, and it usually will give great results without changing the optical qualities.

It also does a pretty good job on metals that aren't rusted or corroded, just dull looking or full of fingerprints.

73DG
Logged

Just pacing the Farady cage...
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.06 seconds with 18 queries.