Strange mod on a Globe Scout 65

[VE7RME]

I purchased this rig recently and I am in the process of trying to get it running again. Upon opening it up, I see some odd work that has been done (pictures attached). There is a red wire on the On Off/Filament Gain control that has been disconnected, the white disconnected wire goes to the Antenna Relay connector and the Plate indicator light from there, and I am unsure what the other connection has changed. Any ideas what is going on here? I found the manual and schematic for the 65A, but it doesn’t look to be the same (I’m not sure what the difference actually is between the 65/65A/65B?).

[Pete, WA2CWA]

Info on the 65 but not the actual manual:
http://www.k2tqn.net/oldradio/arrl/2006-11/Globe-65-article.htm



Link to schematic:
http://www.k2tqn.net/oldradio/arrl/2006-11/globe-65-schematic.htm

[VE7RME]

Thanks!