The AM Forum
June 13, 2024, 04:42:44 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: New Filament test Results with 3rd winding  (Read 644 times)
0 Members and 1 Guest are viewing this topic.

Offline Offline

Posts: 63

« on: July 06, 2023, 07:46:22 PM »

Wound 25 turns on the Ameritron filament choke with approximately 25.5uh inductance at 1.900mHz.  This is the 3rd winding.  Couldn't wind it exactly in the space between the existing turns because they were spreading apart.

Test results
1K ohm carbon resistor
Before resistor- 6.4v
After resistor- 2.8v

Carbon Potentiometer set to 600 ohms.
Before Pot- 6.2v
After Pot- 3.2v


Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.047 seconds with 18 queries.