Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
BC 312 Military Receiver- Mechanical Question




 
The AM Forum
September 23, 2020, 06:47:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: BC 312 Military Receiver- Mechanical Question  (Read 2094 times)
0 Members and 1 Guest are viewing this topic.
John K5CEY
Guest
« on: May 06, 2005, 01:26:38 AM »

To any one out there who is familiar with the BC 312 / 342.  I need to remove one of the RF coil cans to gain access a shorted B+ bypass condenser which is inside. (darn those Micamold war time condensers).

To remove the can, I need to pull out the band switch shaft. I've removed the set screw where the shaft runs through the gear, but the shaft will not slip through. I must be over looking something. Any one remember how to do this?

I use my BC 312 as a frequency meter to make sure that I'm within 25 kc. of my target frequency.

                         John
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.041 seconds with 16 queries.