Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Orienting Two 3C24 tubes (corrected tube type)




 
The AM Forum
August 11, 2020, 11:56:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Orienting Two 3C24 tubes (corrected tube type)  (Read 302 times)
0 Members and 1 Guest are viewing this topic.
N4LTA
Contributing
Member
*
Offline Offline

Posts: 989


« on: June 26, 2020, 12:19:25 PM »

I am starting to build a small 100 watt class am rig using two 3C24 triode tubes. The tube has the plate on top and the grid on the side.

Trying to figure the best way to locate them side by side. I would guess taking the plate parasitic suppressors of the top in one direction, and the grid suppressors at 180 degrees.

Never seen a photo of a rig with these tubes.

Thanks

Pat
N4LTA
Logged
KC2ZFA
Member

Offline Offline

Posts: 391



« Reply #1 on: June 26, 2020, 01:32:09 PM »

the 1947 Editors & Engineers handbook shows amps with 35TG and HK-54 tubes, the pics don't photograph well but they show the tubes seated deep in the chassis with, what I figure, less than a quarter of the tube base protruding above it.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 18 queries.