Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
4D32 transmitter




 
The AM Forum
December 12, 2019, 08:44:02 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 4D32 transmitter  (Read 766 times)
0 Members and 1 Guest are viewing this topic.
W4RFM
Member

Offline Offline

Posts: 335



WWW
« on: November 11, 2019, 05:22:50 PM »

I am looking for a schematic of a phone transmitter using the 4D32. I have the Collins 32V, but can't find the Hammar HT-20. If anyone has a home grown design, I would welcome that as well. I want to build a simple 80/40 meter 100 watt class rig with the 4D32 modulated by a pair of 6550's. Thanks Bob W4RFM.
Logged

BOB / W4RFM  "I have looked far and wide, (I also checked near and narrow)"
KK4YY
Member

Offline Offline

Posts: 425


Your best isn't as good as you can be.


« Reply #1 on: November 11, 2019, 05:33:13 PM »

You can't find the HT-20 because it's a Hallicrafters not a Hammerlund. http://jptronics.org/Hallicrafters/manuals/halli.ht-20.pdf
Logged

All your worries won't add a day to your life, or make the ones you have any happier.
w8khk
Member

Offline Offline

Posts: 893


This ham got his ticket the old fashioned way.


WWW
« Reply #2 on: November 11, 2019, 06:05:28 PM »

The Johnson Viking I used a single 4D32 before they went with the pair of 6146s in the Viking II.  Not really a whole lot of difference.  You could probably sub a single 4D32 for most any dual 6146 design.
Logged

Rick / W8KHK  ex WB2HKX, WB4GNR
W4RFM
Member

Offline Offline

Posts: 335



WWW
« Reply #3 on: November 12, 2019, 11:02:28 AM »

Those dang H's!  Thanks, I needed that. Smiley
Bob
Logged

BOB / W4RFM  "I have looked far and wide, (I also checked near and narrow)"
WA4WAX
Member

Offline Offline

Posts: 290


« Reply #4 on: November 12, 2019, 11:37:02 AM »

There is a good article in CQ.  Sometime back in the mid to late 1950's.

If you cannot find it, I will dig it up for you.
Logged
KK4RF
Member

Offline Offline

Posts: 144


« Reply #5 on: November 13, 2019, 08:37:38 AM »

Tom Marcellino, W3BYM, has designed a number of transmitters using the 4D32 tube. All of them CW. Those articles are in Electric Radio. Might be worth looking at for some ideas. Keep us posted. 73s,  Marty, KK4RF
Logged
WA5VGO
Member

Offline Offline

Posts: 143


« Reply #6 on: November 13, 2019, 01:22:49 PM »

This is my 80/40 4D32 rig. The power supply and modulator is a separate chassis that I can tuck under the desk. The modulators are 809's.

Darrell


* 4D32.JPG (2863.51 KB, 4032x3024 - viewed 94 times.)
Logged
WA4WAX
Member

Offline Offline

Posts: 290


« Reply #7 on: November 14, 2019, 10:00:59 PM »

Here it is!

Maybe use a bias supply for the grid, and lose the clamp tube.

http://www.electronicsandbooks.com/eab3/manual/Magazine/C/CQ%20Amateur%20Radio%20US/1947/09%20September%201947.pdf
Logged
W4RFM
Member

Offline Offline

Posts: 335



WWW
« Reply #8 on: November 15, 2019, 10:28:28 AM »

This is excellent, Thanks, I am going to refer to this when I begin mine. Probably use a pi output but everything else is great. Thanks again.
Bob W4RFM
Logged

BOB / W4RFM  "I have looked far and wide, (I also checked near and narrow)"
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.059 seconds with 18 queries.