The AM Forum
December 03, 2024, 06:48:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: New Receiver  (Read 8235 times)
0 Members and 1 Guest are viewing this topic.
KA3EKH
Member

Offline Offline

Posts: 804



WWW
« on: October 15, 2019, 02:52:22 PM »

Just picked this up, always wanted to play around with one of the WW2 German radios and the Torn E.B. was the first opportunity I have had to purchase a German radio in around thirty to forty years of playing around with Military Surplus radios. Have had almost every common American set from command sets, TCS, TBW, TBX and tons of newer items like my 106 sets and a splattering of Russian sets like the R-311 and R-324 but WW2 German stuff is expensive and hard to come by.
Going to start building a DC power supply for this tonight but have an operational question. How do you receive CW on a regenerative detector? Do you run the regeneration control higher? And if that’s the case how do you receive AM? Do you have to back off? Can see no separate controls for using the CW mode apart from voice other than a filter for CW mode.





* IMG_1302.JPG (1713.02 KB, 2592x1936 - viewed 977 times.)
Logged
SM6OID
Member

Offline Offline

Posts: 221



« Reply #1 on: October 15, 2019, 04:11:00 PM »

Hi!

Congratulations!
For CW, turn the regen up until you get a nice tone.
For AM, keep the regen control as high as needed but below the point were it
oscillates.
Logged

RADIO: 51J-4, R-390A, SP-600 JX-21, BRT-400, Set No 19, T-47/ART-13, RF-590, SRT CR91, BC-312D, BC-348Q, HF-8020/8030/8010A/8090,  and much more...

ENGINE: Zvezda M50 F6L (V12), Rolls-Royce Meteor mk4B/2 (V12), Rolls-Royce B80 (inline 8 ) and much more
PA0NVD
Member

Offline Offline

Posts: 615


Nico and Chappie (Chappie is the dog...)


« Reply #2 on: October 15, 2019, 04:50:41 PM »

Nice!! Should give you a lot of pleasure, BACK TO THE BASICS!!
Logged
KA3EKH
Member

Offline Offline

Posts: 804



WWW
« Reply #3 on: October 28, 2019, 04:41:50 PM »

Just finished a YouTube Video on the Torn E.B. TRF Receiver, you can see it at:

https://www.youtube.com/watch?v=jQHJZN1NH6U&t=24s

Ray F/KA3EKH
Logged
SM6OID
Member

Offline Offline

Posts: 221



« Reply #4 on: October 28, 2019, 06:20:02 PM »

Hi!

Ray, great video!
Out of curiosity, did you make any performance tests such as sensitivity etc?
Logged

RADIO: 51J-4, R-390A, SP-600 JX-21, BRT-400, Set No 19, T-47/ART-13, RF-590, SRT CR91, BC-312D, BC-348Q, HF-8020/8030/8010A/8090,  and much more...

ENGINE: Zvezda M50 F6L (V12), Rolls-Royce Meteor mk4B/2 (V12), Rolls-Royce B80 (inline 8 ) and much more
KA3EKH
Member

Offline Offline

Posts: 804



WWW
« Reply #5 on: October 29, 2019, 08:37:41 AM »

No, have not done any test beyond just playing around with it on the different antennas. The regenerative detector somehow makes it just as sensitive as a superhet but would assume that depending on the setting it would have a broad effect on sensitivity. Never used a TRF with regenerative detector before but now can see why they were so popular.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.084 seconds with 18 queries.