Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Ranger II tuning procedure question-REVISED




 
The AM Forum
November 13, 2018, 01:54:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Ranger II tuning procedure question-REVISED  (Read 352 times)
0 Members and 1 Guest are viewing this topic.
w3khg
Member

Offline Offline

Posts: 11


« on: June 28, 2018, 10:14:49 AM »

On page 8, C. 3. c.  says to turn the Meter switch to the "PLATE" position. The meter needle then indicates 30mA of current. Is this normal? Is there always a "resting" plate current of 30mA. This indication is when the OPERATE switch is in STANDBY. When in the OPERATE CW position the meter indication rises to 50mA.

73
john/w3khg

Disregard. This current is due to the clamper tube 6AQ5 conducts during low plate values for final protection.


Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.068 seconds with 18 queries.