The AM Forum
December 06, 2024, 04:01:28 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: My Bendix TA-12 with dyno / modulator  (Read 15590 times)
0 Members and 1 Guest are viewing this topic.
w1vtp
Member

Offline Offline

Posts: 2632



« on: April 01, 2018, 12:31:38 PM »

This is my Bendix TA-12. My mentor Don, W1GAZ promoted this transmitter along with the Hammarlund SP-400, an excellent pair. My transmitter continues to be in a state of stasis because I don't know how to safely get rid of the green corrosion that is on the rotary inductors.  The MP28a dyno / modulator seems to be in new unused condition (dunno why the tape was put over the vent holes on the dyno)

I'll upload several pics in successive posts

Al


* TA 12 FRONT.gif (1331.9 KB, 2000x1325 - viewed 1250 times.)

* TA12FRONT & MOD-DYNO SIDE.gif (1227.46 KB, 2000x1325 - viewed 1425 times.)
Logged
w1vtp
Member

Offline Offline

Posts: 2632



« Reply #1 on: April 01, 2018, 12:34:38 PM »

Pic set 2


* MP28A SIDE A.gif (1367.12 KB, 2000x1325 - viewed 1098 times.)

* TA12 DYNO.gif (1547.44 KB, 1604x2000 - viewed 1244 times.)

* MP28A SIDE B.gif (2260.71 KB, 2000x1849 - viewed 1156 times.)
Logged
w1vtp
Member

Offline Offline

Posts: 2632



« Reply #2 on: April 01, 2018, 03:15:31 PM »

set 3


* TA12 DYNO BOTTOM.gif (2298.31 KB, 2000x1872 - viewed 1249 times.)

* CORROSIAN TOP.gif (1338.42 KB, 2000x1325 - viewed 1096 times.)

* CORROSIAN DETAIL (SIDE).gif (1014.44 KB, 2000x1325 - viewed 1086 times.)
Logged
w1vtp
Member

Offline Offline

Posts: 2632



« Reply #3 on: April 01, 2018, 03:19:41 PM »

Set 4


* REAR VIEW.gif (1329.94 KB, 2000x1325 - viewed 1304 times.)

* TOP.gif (1551.69 KB, 2000x1516 - viewed 1131 times.)

* BOTTOM.gif (1633.05 KB, 2000x1325 - viewed 1170 times.)
Logged
PA0NVD
Member

Offline Offline

Posts: 615


Nico and Chappie (Chappie is the dog...)


« Reply #4 on: April 01, 2018, 03:38:48 PM »

That's a nice set, please tell something about it. Are the tubes 807? The pics are a bit too large to download, every pic takes about 6 minutes!!
Interesting the combination of mod and pwr supply!
Logged
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 8301



WWW
« Reply #5 on: April 01, 2018, 07:55:59 PM »

Very beautiful set!
Logged

Radio Candelstein
AJ1G
Contributing
Member
*
Offline Offline

Posts: 1292


« Reply #6 on: April 01, 2018, 09:31:18 PM »

Re the tarnish on the roller inductors, did you try Brasso or silver polish? You are lucky to have the dyno/modulator as well as the transmitter.  Many transmitters but few dyno/mods out there...
Logged

Chris, AJ1G
Stonington, CT
PA0NVD
Member

Offline Offline

Posts: 615


Nico and Chappie (Chappie is the dog...)


« Reply #7 on: April 02, 2018, 06:50:14 PM »

Hi Al
I had once a roller inductor that had the same problem. It was mainly a kind of grease they used that had turned bad, that may have been a little acid or so and provoked the problem. I used a rough type of cloth with alcohol to remove the green / blue grease.
Logged
w1vtp
Member

Offline Offline

Posts: 2632



« Reply #8 on: April 02, 2018, 07:10:34 PM »

That's a nice set, please tell something about it. Are the tubes 807? The pics are a bit too large to download, every pic takes about 6 minutes!!
Interesting the combination of mod and pwr supply!

PA0NVD:

I assume you mean the file size not the picture dimensions. The transmitter has oscillator / buffers of 12SK7's  The output consists of 2 x 807s in parallel. The 807s are driven by a single 807.  In my opinion a perfect tube linup.  The modulator consists of push pull 807s driven by a 6N7 / 6F6 driver.  The whole transmitter was a well designed unit used by the Liberator bomber and other WW2 aircraft.  

PA0VD, I'll customize some highly compressed images that are without loss of detail and picture size.  I've contacted you via your QRZ email to determine your comfortable file size per email.

Logged
Tom W2ILA
Member

Offline Offline

Posts: 290


« Reply #9 on: April 03, 2018, 08:15:32 PM »

Great looking set!  And a nice S38 also.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.063 seconds with 19 queries.