The AM Forum
December 03, 2024, 01:34:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Mechanical sequencer  (Read 10234 times)
0 Members and 1 Guest are viewing this topic.
ka1tdq
Member

Offline Offline

Posts: 1506


Red part turned in for a refund.


« on: June 09, 2017, 10:33:19 PM »

This one isn't rocket science, but should come in handy for quick 'n dirty (and simple) class E setups. 

It's a mechanical sequencer that uses a 4-position, single pole, 3-deck rotary switch.  The switch has to be make-before-break (MBB).

If and whenever I throw a transmitter in the car, I'll use one of these.

Jon


* IMG_1669.JPG (1323.09 KB, 4032x3024 - viewed 1066 times.)
Logged

It’s not just values, it’s business.
ka1tdq
Member

Offline Offline

Posts: 1506


Red part turned in for a refund.


« Reply #1 on: June 18, 2017, 01:21:04 AM »

Here it is. I've ordered some LED holders so that I'll have a visual aid to see the switch position.

It checks out with the ohm meter. There's no break in continuity when switching in between events.

This is the least complicated part of a class E station. But, if you don't got one, it ain't gonna work.

Jon


* IMG_1678.JPG (2355.65 KB, 4032x3024 - viewed 935 times.)

* IMG_1677-2.JPG (1936.01 KB, 4032x3024 - viewed 1040 times.)
Logged

It’s not just values, it’s business.
ka1tdq
Member

Offline Offline

Posts: 1506


Red part turned in for a refund.


« Reply #2 on: June 23, 2017, 09:54:04 AM »

...and in all its glory

https://youtu.be/WF2XivrDuLU

Jon
Logged

It’s not just values, it’s business.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.062 seconds with 19 queries.