The AM Forum
April 25, 2024, 04:45:45 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: W2DU's last project.........  (Read 3255 times)
0 Members and 1 Guest are viewing this topic.
WA4WAX
Member

Offline Offline

Posts: 417


« on: March 07, 2017, 01:41:47 PM »

W2DU's last project involved MRI and NMR.  I was the principal, and he was the "bounce off" man.  He was very helpful and keenly interested.

What came of it:  The world's first full duplex MR/NMR coil.  Would that he would have lived to seen it.
The prototype runs on proton and carbon.

The picture shows a carbon 13 spectrum of ethyl alcohol, or ethanol........or booze.

To the left, the proton spins are coupled to the carbon 13 nuclei.

In the middle, RF on the proton frequency decouples the protons from the carbon 13 nuclei, and each carbon collapses to one peak.

To the right, we decouple again, but with Nuclear Overhauser Effect enhancement.

Enjoy!


* 13C_EtOH.gif (46.28 KB, 4500x1783 - viewed 365 times.)
Logged
Pete, WA2CWA
Moderator
Member

Offline Offline

Posts: 8166


CQ CQ CONTEST


WWW
« Reply #1 on: March 07, 2017, 03:41:22 PM »

Unfortunately, I have no clue what this means or its purpose or use.
Logged

Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
KA0HCP
Contributing
Member
*
Offline Offline

Posts: 1188



« Reply #2 on: March 07, 2017, 04:49:47 PM »

Unfortunately, I have no clue what this means or its purpose or use.
The key to success here is using cold 807's in the final amplifier to activate the ethanol and Carbon 13!  Wink
Logged

New callsign KA0HCP, ex-KB4QAA.  Relocated to Kansas in April 2019.
WA4WAX
Member

Offline Offline

Posts: 417


« Reply #3 on: March 07, 2017, 05:23:00 PM »

LOL! The amp needs to be linear.  No class C stuff here.

Well, it just so happens that carbon 13 resonates down in the lower part of 6 meters in a 4.7 Tesla magnet.  Proton is right around 200 MHz.

Here is a look at carbon 13 enriched urea.  Enrichment here is 99%.




* 13C_urea.gif (29.86 KB, 4500x1783 - viewed 299 times.)
Logged
W2PFY
Contributing
Member
*
Offline Offline

Posts: 13312



« Reply #4 on: March 07, 2017, 05:31:56 PM »

Can this be modulated in the conventional way? If so, what percentage  can it be modulated before second order distortion occurs?
Logged

The secrecy of my job prevents me from knowing what I am doing.
n1zpy
Member

Offline Offline

Posts: 16


« Reply #5 on: March 08, 2017, 06:34:29 AM »

Can this be modulated in the conventional way? If so, what percentage  can it be modulated before second order distortion occurs?
What mod transformer would be needed to plate modulate it?  Or can this only be glass modulated?
Logged
flintstone mop
Contributing
Member
*
Offline Offline

Posts: 5055


« Reply #6 on: March 08, 2017, 09:31:37 AM »

Can this be modulated in the conventional way? If so, what percentage  can it be modulated before second order distortion occurs?
What mod transformer would be needed to plate modulate it?  Or can this only be glass modulated?

Aluminum cans for shielding

Logged

Fred KC4MOP
W3RSW
Contributing
Member
*
Offline Offline

Posts: 3308


Rick & "Roosevelt"


« Reply #7 on: March 08, 2017, 10:41:02 AM »

I'm impressed!   Grin
Feels good too to be spinning free again.
You don't know what boring is until your stuck living right next to neutrons all your life.
"Free at last."

Logged

RICK  *W3RSW*
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.038 seconds with 18 queries.