The AM Forum
November 01, 2024, 10:25:09 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Hallicrafters HT-40  (Read 48001 times)
0 Members and 1 Guest are viewing this topic.
DMOD
AC0OB - A Place where Thermionic Emitters Rule!
Contributing
Member
*
Offline Offline

Posts: 1806


« on: July 22, 2013, 06:43:11 PM »

Updated: 9/2021 With Text, Schematics, and Theory of Operation:



Phil - AC0OB









* HT-40 Preferred Upgrades.pdf (529.04 KB - downloaded 913 times.)
Logged

Charlie Eppes: Dad would be so happy if we married a doctor.
Don Eppes: Yeah, well, Dad would be happy if I married someone with a pulse.NUMB3RS   Smiley
KK4RF
Member

Offline Offline

Posts: 158


« Reply #1 on: October 09, 2013, 05:28:55 PM »

Phil,
     Thanks for the message on the HT-40. I'm running mine stock and for the most part have been getting fairly good audio reports. Your mods do look pretty interesting, however, and I may look into them again at a later date.
     Working on another ScreenModulated/controlled Carrier rig, the KnightKit T150-A. It does not get very good audio reports, however. I plan to read up on as many mods for that radio as possible.I'd like it to sound as good as the HT-40. Thanks again, Phil.---Marty, KK4RF---
Logged
DMOD
AC0OB - A Place where Thermionic Emitters Rule!
Contributing
Member
*
Offline Offline

Posts: 1806


« Reply #2 on: October 22, 2013, 12:14:12 PM »

Quote
Thanks for the message on the HT-40. I'm running mine stock and for the most part have been getting fairly good audio reports. Your mods do look pretty interesting, however, and I may look into them again at a later date.

I am glad to hear your audio is acceptable, but I would bet if you looked at the modulation with a scope, it probably has no more than 75% modulation unless it has been modified.

And having the Red Led modulation indicator is a lot of fun.  Cheesy

If you are working on the T-150, check out these mods here as well:

http://amfone.net/Amforum/index.php?topic=34680.0

I have another update coming with actual operating parameters noted during operation.

Phil - AC0OB
Logged

Charlie Eppes: Dad would be so happy if we married a doctor.
Don Eppes: Yeah, well, Dad would be happy if I married someone with a pulse.NUMB3RS   Smiley
n4joy
Member

Offline Offline

Posts: 224



« Reply #3 on: February 02, 2014, 10:11:43 AM »

This is a good write-up.  I firmly believe the HT-40 is perhaps one of the best carrier controlled transmitters for AM beginners.  I use mine on 10 meters and always receive good audio reports with its stock configuration.
Logged
DMOD
AC0OB - A Place where Thermionic Emitters Rule!
Contributing
Member
*
Offline Offline

Posts: 1806


« Reply #4 on: February 02, 2014, 05:06:47 PM »

Thanks.

I also get good audio reports as well.

With a few component changes and additions the audio and modulation can be improved.

The R-C feedback circuit from the Modulator cathode back to the speech amp really helps to reduce distortion.

And the 6DQ5 final is both low cost ($7.50 to $10.00) each and pretty darn rugged.

Phil - AC0OB
Logged

Charlie Eppes: Dad would be so happy if we married a doctor.
Don Eppes: Yeah, well, Dad would be happy if I married someone with a pulse.NUMB3RS   Smiley
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.034 seconds with 18 queries.