The AM Forum
October 15, 2024, 11:26:11 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Yaesu FT-901DM  (Read 3960 times)
0 Members and 1 Guest are viewing this topic.
W6TOM
Contributing
Member
*
Offline Offline

Posts: 460


« on: May 27, 2013, 03:11:05 PM »

  I have a Yaesu FT=901DM, I need to wire a 3 conductor, hot, neutral and equipment ground, 117 VAC to the 12 pin jones plug, anyone have the wiring info? Thanks!!
Logged
Pete, WA2CWA
Moderator
Member

Offline Offline

Posts: 8134


CQ CQ CONTEST


WWW
« Reply #1 on: May 27, 2013, 03:53:19 PM »

The information is on the 901DM schematic in the upper right corner.
Logged

Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
W6TOM
Contributing
Member
*
Offline Offline

Posts: 460


« Reply #2 on: May 27, 2013, 04:40:35 PM »

 What ever it is I can't open it.
Logged
AA1QT
Harry-AA1QT
Member

Offline Offline

Posts: 1

The Shack after move from NH.


« Reply #3 on: May 28, 2013, 09:04:40 PM »

Jumper pin 1 to pin8...Jumper pin 9 to pin 11...Line one to pin 2...Line two to pin 4. All other pins no connections if useing a new cord with green GND wire  that wire will just go to rig case how ever you wish to route it.
1 to8 9 to 11 line one to two line two to 4.
line one and two are from when there were just two wires in the wall plug cords.
Logged

AKA,..\"Harmonica Harry\"!
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.046 seconds with 18 queries.