|
Title: Yaesu FT-901DM Post by: W6TOM on May 27, 2013, 03:11:05 PM I have a Yaesu FT=901DM, I need to wire a 3 conductor, hot, neutral and equipment ground, 117 VAC to the 12 pin jones plug, anyone have the wiring info? Thanks!!
Title: Re: Yaesu FT-901DM Post by: Pete, WA2CWA on May 27, 2013, 03:53:19 PM The information is on the 901DM schematic in the upper right corner.
Title: Re: Yaesu FT-901DM Post by: W6TOM on May 27, 2013, 04:40:35 PM What ever it is I can't open it.
Title: Re: Yaesu FT-901DM Post by: AA1QT on May 28, 2013, 09:04:40 PM Jumper pin 1 to pin8...Jumper pin 9 to pin 11...Line one to pin 2...Line two to pin 4. All other pins no connections if useing a new cord with green GND wire that wire will just go to rig case how ever you wish to route it. AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
1 to8 9 to 11 line one to two line two to 4. line one and two are from when there were just two wires in the wall plug cords. |