The AM Forum
April 27, 2024, 09:55:30 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: UTC PA-307  (Read 3573 times)
0 Members and 1 Guest are viewing this topic.
Detroit47
Member

Offline Offline

Posts: 647



« on: January 23, 2012, 07:05:06 PM »

I have an UTC PA-307 transformer and no information on it. I looked thru the bunker and came up with a zero. Does anybody have the spec's on it.

Thanks John N8QPC
Logged
KE6DF
Member

Offline Offline

Posts: 784


WWW
« Reply #1 on: January 23, 2012, 07:18:48 PM »

Look up CG-307 -- it's same only slightly different shape.

3500 3000 2400 - 0 - 2400 3000 3500  at  300ma

I have a CG-308 which is the same only 500 ma.

Dave
Logged

Detroit47
Member

Offline Offline

Posts: 647



« Reply #2 on: January 23, 2012, 08:03:25 PM »

It is ahuge transformer for only 300 mills. I'd say at least 70 lbs.

John N8QPC
Logged
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 8315



WWW
« Reply #3 on: January 23, 2012, 08:14:35 PM »

These monsters are all potted as well IIRC incl. the -309, the 1A King!
Logged

Radio Candelstein - Flagship Station of the NRK Radio Network.
Detroit47
Member

Offline Offline

Posts: 647



« Reply #4 on: January 23, 2012, 08:21:02 PM »

So unless I am wrong if I set it up center tap full wave, With a choke input I'm looking at about 840 watts of power out of that thing.
3500 X .8 = 2800     2800 x .3= 840  Unless I have my head up my ____

John
Logged
KE6DF
Member

Offline Offline

Posts: 784


WWW
« Reply #5 on: January 23, 2012, 09:11:55 PM »

So unless I am wrong if I set it up center tap full wave, With a choke input I'm looking at about 840 watts of power out of that thing.
3500 X .8 = 2800     2800 x .3= 840  Unless I have my head up my ____

John

That's sounds right. Probably a little higher voltage than 2800.

And it's a CCS transformer. So it will do that all day plus weekends rain or shine.

Those big CG/PA transformers are very conservatively rated and high quality.
Logged

W2VW
Contributing
Member
*
Offline Offline

Posts: 3489


WWW
« Reply #6 on: January 24, 2012, 01:32:40 AM »

As you probably already know, do not use a full wave bridge. It will ruin the xfmr.
Logged
Detroit47
Member

Offline Offline

Posts: 647



« Reply #7 on: January 24, 2012, 04:11:19 AM »

All them old peices of iron were made for ct full wave with L input.

Thanks John
Logged
K3YA
Contributing
Member
*
Offline Offline

Posts: 134



« Reply #8 on: January 24, 2012, 10:04:51 AM »

I have a CG-306, a slightly lower voltage version, in my 4-1000 GG linear.  It's connected to a full wave bridge, capacitor input supply providing about 6 KV.  It's been running about 15 years now without problem, so the center tap must be pretty well insulated. 
Logged
KE6DF
Member

Offline Offline

Posts: 784


WWW
« Reply #9 on: January 24, 2012, 10:48:35 AM »

I have a CG-306, a slightly lower voltage version, in my 4-1000 GG linear.  It's connected to a full wave bridge, capacitor input supply providing about 6 KV.  It's been running about 15 years now without problem, so the center tap must be pretty well insulated. 

Is yours a CG306W?

The ones with the W suffix were designed to work in a bridge circuit.

There is a 1970 UTC catalog out there on the web that states this and show both part numbers.

Dave
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.059 seconds with 18 queries.