The AM Forum
March 19, 2024, 02:04:55 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Flex 3000 question  (Read 3763 times)
0 Members and 1 Guest are viewing this topic.
WA4JK
Member

Offline Offline

Posts: 245


« on: September 07, 2011, 07:28:18 AM »

My question is can you connect the mic input to the computer and avoid using the modular mic connector on the 3000. I do not want to pay more money to aquire the mic connector to 8 pin adapter cable. I hate the modular mic plug cause I cant just solder cables to do what I want to a modular plug..
Logged
N3WWL
Founding
Member
*
Offline Offline

Posts: 311


« Reply #1 on: September 07, 2011, 08:42:15 AM »

There is a "D" connector on the rear labeled "Flexwire".  This connector has provisions for line level mic input.  You will need an outboard preamp should you decide to go this route.  It will require soldering a mic cable to a standard 9 pin "D" connector (like the serial port connector on most older computers - be advised that pin 3 has been blocked).  The PowerSDR software will allow you to choose the use of this connector through the PowerSDR mixer control.  Check the Flex web site to download a user manual to familiarize yourself with the connections.  I've been using mine this way for years.
Logged
WD8BIL
Contributing
Member
*
Offline Offline

Posts: 4409


« Reply #2 on: September 07, 2011, 09:16:31 AM »

Quote
I've been using mine this way for years.

And sounding great, Jay.
Great to hear ya on 40 again!!
Logged
WA4JK
Member

Offline Offline

Posts: 245


« Reply #3 on: September 07, 2011, 09:40:32 AM »

OK look like it can also allow for the PTT line connection as well as the Amp. contacts from the same connector. Thanks...
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.033 seconds with 19 queries.