The AM Forum
April 28, 2024, 05:31:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Help LK800 Power Pak Hook up??  (Read 1668 times)
0 Members and 1 Guest are viewing this topic.
rich
Guest
« on: October 24, 2010, 02:11:52 PM »
Hi, I have a LK800 with internal supply, I recently got the external power pak for it. The external power pak has a connector that goes in back of the amp. I put on connector and no extra volts. So I took off top cover and see two connectors that are not connected to anything. One has two wires which are green and the other connector has two wires yellow.  If I take connetor off internal power supply, then one of these conectors will fit there.
But both of the connectors that are not connected are two pin and if I disconnect the 4 pin off internal, Not sure how this works?
Please help. Thanks Rich
Logged
ke7trp
Contributing
Member
*
Offline Offline

Posts: 3659
« Reply #1 on: October 25, 2010, 03:43:33 PM »
I have that amp here. Mine is an ISM model with the big power pack. Not sure which power pack you have. There was a document on how to install this power pack. I dont have it.  Mine came this way.  However, the manual for the LK800 is online. I have the original copy.  If you cant find it, Let me know. 


C
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Help LK800 Power Pak Hook up??
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.073 seconds with 18 queries.