32v1 restoration

[W6TJK]

Folks,
I am undertaking restoration of 32v1 that is in rough shape.

Need close interior shots of PS, Mod, PA top/bottom areas.  Also front mechanical top/bottom.

PS is a mess, so need some good orientation shots showing what/where.
Anything that shows parts and wiring placement, etc.
Wiring harness ?

Mod area needed to give me visuals to help see what is/isnt right.

Need good shots of the tank/loading area & its switch/tap sets, loading caps, etc.
This was all cut up and doesn't look right relative to the 32v1 manual.

Need good shots of how the PA plate connects to meter/tank.

Need good look under PA and drivers.  There are a bunch of hack "fixes" that look odd.

Any help GREATLY appreciated.

Tom
W6TJK

[ke7trp]

I dont have the 32 anymore. I am sure someone here can help you tom.

C

[W1UJR]

Not a v1 but perhaps this might help --> http://www.w1ujr.net/collins_32v3.htm

[WD5JKO]

Here is some more nice illustrations of a 32V3 from Boraxo John, WA5BXO:

http://www.qsl.net/wa5bxo/32v3/