|
Title: 32v1 restoration Post by: W6TJK on September 14, 2010, 04:56:10 PM Folks,
I am undertaking restoration of 32v1 that is in rough shape. Need close interior shots of PS, Mod, PA top/bottom areas. Also front mechanical top/bottom. PS is a mess, so need some good orientation shots showing what/where. Anything that shows parts and wiring placement, etc. Wiring harness ? Mod area needed to give me visuals to help see what is/isnt right. Need good shots of the tank/loading area & its switch/tap sets, loading caps, etc. This was all cut up and doesn't look right relative to the 32v1 manual. Need good shots of how the PA plate connects to meter/tank. Need good look under PA and drivers. There are a bunch of hack "fixes" that look odd. Any help GREATLY appreciated. Tom W6TJK Title: Re: 32v1 restoration Post by: ke7trp on September 14, 2010, 08:43:45 PM I dont have the 32 anymore. I am sure someone here can help you tom.
C Title: Re: 32v1 restoration Post by: W1UJR on September 14, 2010, 08:55:53 PM Not a v1 but perhaps this might help --> http://www.w1ujr.net/collins_32v3.htm
Title: Re: 32v1 restoration Post by: WD5JKO on September 14, 2010, 10:55:00 PM Here is some more nice illustrations of a 32V3 from Boraxo John, WA5BXO: http://www.qsl.net/wa5bxo/32v3/ |