The AM Forum
April 26, 2024, 06:25:16 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: WTD: Info: Meissner Signal Shifter 160 Coils  (Read 3696 times)
0 Members and 1 Guest are viewing this topic.
Carl WA1KPD
Contributing
Member
*
Offline Offline

Posts: 1636
« on: February 06, 2006, 08:07:13 PM »
I have an old model of the Signal Shifter with 3 plug in coils. I am looking for any information on the coils for 160. In particular I need number of windings, taps etc. I would also be very happy to buy a set of them if you have them in the junque box

Thanks and 73
KPD
Logged
Carl

"Okay, gang are you ready to play radio? Are you ready to shuffle off the mortal coil of mediocrity? I am if you are." Shepherd
N8ECR
Guest
« Reply #1 on: February 07, 2006, 09:35:10 AM »
I had a set of 'em a few years back and gave them to an OT, W8AP, if you don't find anything, you might try to contact him for info :)Mike/N8ECR
Logged
Carl WA1KPD
Contributing
Member
*
Offline Offline

Posts: 1636
« Reply #2 on: February 07, 2006, 03:20:48 PM »
Thank you
Logged
Carl

"Okay, gang are you ready to play radio? Are you ready to shuffle off the mortal coil of mediocrity? I am if you are." Shepherd
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: WTD: Info: Meissner Signal Shifter 160 Coils
« previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 18 queries.