The AM Forum
October 10, 2024, 03:32:11 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: ARC-2 Schematic I can read!  (Read 483 times)
0 Members and 1 Guest are viewing this topic.
Chuck...K1KW
Contributing
Member
*
Offline Offline

Posts: 163


« on: September 03, 2024, 11:58:33 PM »

Picked up an ARC-2 AM transceiver at the Marlboro Fest.  Been looking on line for a reasonable schematic to figure out a power supply for this interesting rig.

The dynamotor has been removed from this rig but with only four connections it seems that there might be only two supply voltages needed in addition to the 28V.

Plus the multi pin connector on the back needs to be figured out but I suspect most of it is unneeded due to the remoting requirement.

Any help here? 

THanks!

-Chuck K1KW
Logged

73, Chuck...K1KW
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.044 seconds with 18 queries.