The AM Forum
October 06, 2024, 06:05:36 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Wanted: Wafer for old American-made wafer switch  (Read 1677 times)
0 Members and 1 Guest are viewing this topic.
KN4SMF
Member

Offline Offline

Posts: 19


« on: March 01, 2024, 07:07:56 PM »

Specifically, wafer #2 of the wafer switch assembly on my BC 348 is burned up. This assembly has 2 separate and identical wafers. I don't necessarily seek that particular exact BC 348 part and there were certainly a number of other American made things from that era that may have a wafer like what I'm hunting. It has 4 identical contacts on the round inside, and the contacts are long-short-short, long-short, short, etc, for a total of 4. I have attached photos. Thank you.


* 1.jpg (778.55 KB, 1140x1272 - viewed 144 times.)

* 2.jpg (491.51 KB, 1174x1249 - viewed 132 times.)
Logged
KN4SMF
Member

Offline Offline

Posts: 19


« Reply #1 on: March 31, 2024, 10:01:44 AM »

Bump. Still needed. thank you.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.058 seconds with 18 queries.