The AM Forum
April 27, 2024, 02:52:11 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Parts needed to repair BC-610-E  (Read 444 times)
0 Members and 2 Guests are viewing this topic.
n5ama
Member

Offline Offline

Posts: 26
« on: November 21, 2023, 09:28:25 PM »
I’m repairing a BC-610-E and am in need of two items. 1) 2500ohm 100w slider resistor. 2) 500ohm 50w rheostat

These are used in the bias circuit and the modulation level control.

If you have either or both, please contact me with what you are asking.

Thanks!
Tom N5AMA
Logged
n5ama
Member

Offline Offline

Posts: 26
« Reply #1 on: November 22, 2023, 08:07:47 AM »
Found.
Thanks and have a great Thanksgiving!
Tom N5AMA
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Military Amateur Radio Section > Topic: Parts needed to repair BC-610-E
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.