The AM Forum
November 05, 2024, 03:28:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: TBX Connectors  (Read 4620 times)
0 Members and 2 Guests are viewing this topic.
KA3EKH
Member

Offline Offline

Posts: 796



WWW
« on: March 24, 2023, 04:33:47 PM »

Working on this TBX project and need a couple connectors, the two for the receiver (8 pin) and transmitter (4 pin). The male panel mount connectors are CUF – 49041 and CUF – 49043 and a PL-62 shell apparently will fit into the socket but not a PL-61
Because this is a original 1939 TBX Transmitter/Receiver reluctant to change out the connectors for anything else. Think I can modify a PL-61 that I have by drilling out a new hole in the body of the connector and be able to use that for the transmitter but the receiver is another story being that it uses seven of the eight pins for all the different battery voltages.
If anyone has anything or know what the appropriate connectors are called please let me know.


Logged
W7TFO
WTF-OVER in 7 land Dennis
Contributing
Member
*
Offline Offline

Posts: 2495


IN A TRIODE NO ONE CAN HEAR YOUR SCREEN


WWW
« Reply #1 on: March 24, 2023, 05:22:53 PM »

A photo or two makes life a lot easier...

73DG
Logged

Just pacing the Farady cage...
w7fox
Member

Offline Offline

Posts: 106


« Reply #2 on: March 24, 2023, 11:22:08 PM »

I assume the sockets on your TBX use banana plugs as mine does.  It is very easy to make your own connectors using the brass tubing from the hardware store.  I solder a wire to the brass tubing and cover it with heat shrink tubing. I have successfully cast the whole thing in epoxy, but it isn't necessary, and is messy.  Enjoy.

Best regards,
Fox 
Logged
KA3EKH
Member

Offline Offline

Posts: 796



WWW
« Reply #3 on: March 25, 2023, 03:35:45 PM »

Pictures of the radio. The TBX family of radios pre dates the Second World War and was somewhat obsolete by the time of the war but that did not stop the USMC from using them in the Pacific. The early series just used one 837 in the transmitter with suppressor modulation for about three or four watts of AM and a 1C5 mixer and a bunch of 34 tubes for the IF, Detector, BFO and audio. Had a TBX 6 years ago and was gifted this original TBX just recently. They also produced a TBX-8 that was the same size but used newer tubes and components and had fancy features like PTT operation.




* IMG_1312.JPG (1229.38 KB, 2016x1512 - viewed 264 times.)

* IMG_1313.JPG (1078.61 KB, 2016x1512 - viewed 274 times.)
Logged
WB6NVH
Member

Offline Offline

Posts: 272


WWW
« Reply #4 on: March 29, 2023, 07:56:53 PM »

I took a look at my cables. The transmitter cable has porcelain inserts and the connectors are CUF 49040.  The receiver connector is CUF 49042.  There are probably Army version connectors that would fit too but can't help on those.

Geoff Fors
WB6NVH
Monterey CA
Logged

Geoff Fors
Monterey, California
W3SLK
Member

Offline Offline

Posts: 2690

Just another member member.


« Reply #5 on: March 30, 2023, 10:16:42 AM »

Didn't there used to be a fellow in Texas that sold WWII military connectors? I recall looking for an ART-13 connector but sold it before I got the project underway.
Logged

Mike(y)/W3SLK
Invisible airwaves crackle with life, bright antenna bristle with the energy. Emotional feedback, on timeless wavelength, bearing a gift beyond lights, almost free.... Spirit of Radio/Rush
K4NYW
Contributing
Member
*
Offline Offline

Posts: 163



WWW
« Reply #6 on: March 30, 2023, 12:20:22 PM »

Didn't there used to be a fellow in Texas that sold WWII military connectors?

Robert Downs WA5CAB - wa5cab@cs.com
Logged

Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.037 seconds with 19 queries.