The AM Forum
May 19, 2024, 10:07:52 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: Anyone working on an "SCR-299"?  (Read 5256 times)
0 Members and 1 Guest are viewing this topic.

Offline Offline

Posts: 791


« on: January 26, 2017, 10:08:21 AM »


    I'm so done with windows, getting ready to lay
in Linux Lite 3.Whatever.  To that end I was poking
around on my system to find stuff I don't want to
loose.  Ran across a nice pix of a MC-269 as used
in the SCR-299.  I restored and equipped this thing
back in 2000(?).

    The SCR-299 was used early in WWII and came
from depot with a BC-610C. Also used the small
chevy panel delivery truck before the SCR-399
which used the "Shelter" on the back of "Deuce and
a half". Both towed the same 5kw generator.

     Not a lot of the wooden components still exist
from WWII.



sorry for the grainy photo, that's the way it was!

* P7250243.jpg (463.68 KB, 2240x1680 - viewed 1328 times.)
Todd, KA1KAQ

Offline Offline

Posts: 4244


« Reply #1 on: January 27, 2017, 10:18:30 AM »

VERY nice, Dan. You're right - you don't find many of these anymore. I suspect most got ripped out of surplus vehicles that were used for service vans or such. Some may have lived on as work benches in shops or garages. Finding one in decent shape is hard enough. Finding one with the ancillary items like lights, controls, etc or even finding those separately is no doubt an exercise in resourcefulness and patience.

Please post more shots when you can. Always thought it would be neat to rebuild one of those entire outfits.

known as The Voice of Vermont in a previous life
Offline Offline

Posts: 460

« Reply #2 on: January 28, 2017, 12:48:47 AM »

  N6FEG here in the Bay Area has spoken about restoring a SCR-299, the link is from the Military Vehicle Meet at the Alameda County Fairgrounds in Pleasanton, CA. last August. The BC-610 and some of the other items belong to him. I went on the first day of the meet, a Friday, that night a number of us in the Bay Area worked that BC-610 on the short vertical, there were two stations  in Fresno County a 150 miles away that worked it too.


Offline Offline

Posts: 10

« Reply #3 on: February 06, 2023, 02:59:43 PM »

I just saw this post now..5yrs later. Working on trying to piece together a SCR 299 for many years. The person who got the MC-269A table is extremely fortunate, as it's truly a unobtainable piece of the SCR 299...and I've looking for over 30+yrs.

Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.065 seconds with 19 queries.