HV Xmfr, 3.7 @ 2.3 Amp OR 5 kV

[K1PEK]

3700 V. 2.3 Amp or 5 kV, Includes a home built rectifier board mounted to xmfr. (bunch of diodes with equalizing resistors that comprise a rectifier to produce DC.) there is no CT so you would have to run a full wave bridge rectifier which would provide about 5 KV DC with a capacitor input filter or about 3 KV DC with a choke input filter. 220 VAC input.SERIOUS and knowledgeable inquiries ONLY PLEASE . I do not have any further info for full wave, or choke input, rectifying. I do not have a schematic for the existing rectifier attached. I can tell you it works fine when given to me by a good friend who is an expert with hi power amps. Must weigh prox150 lbs.You would need to have another person to help you as I can not lift hip accident. Located near Boston MA.Could hire a moving company to pick it up and ship it. Tough to deal with a trucking co. something like this. Two more pics available. $350.00 OR BEST OFFER,Steve, K1PEK ,   other pics available showing label on xmfr.  The second picture below is "Sideways" i.e. 90 degrees out of phase  HI