The AM Forum
March 28, 2024, 07:24:06 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: N9NEOphyte A PW solution  (Read 5369 times)
0 Members and 1 Guest are viewing this topic.
N9NEO
Member

Offline Offline

Posts: 284


« on: April 07, 2005, 07:25:19 PM »

I have built a piss weak rig using silicon. Worked Dirk at 300mi on 4watt carrier.

Thanks to Art, Frank & Tomm.




http://classe.monkeypuppet.com/viewtopic.php?p=1855#1855
Logged

I'd rather be anatomically correct than politically correct!
N9NEO
Member

Offline Offline

Posts: 284


« Reply #1 on: April 08, 2005, 06:24:42 PM »

Sorry I didn't make it clear that the link is a picture of it.  Somebody emailed me off board and ask for picture.

Take a look at it any you will see that not many parts required to get on the air.  The microphone plugs directly into the board and there is no modulator.  Four mosfets under the pc board, and a series resonant tank circuit.

BELOW IS LINK TO PICTURE OF RIG!

73
NEO



http://classe.monkeypuppet.com/viewtopic.php?p=1855#1855
Logged

I'd rather be anatomically correct than politically correct!
KE1GF
Guest
« Reply #2 on: April 08, 2005, 08:29:36 PM »

Bob, where's the OSC?
Logged
N9NEO
Member

Offline Offline

Posts: 284


« Reply #3 on: April 08, 2005, 11:59:45 PM »

OSC I used is HP function generator.  I have a very nice Oscillator that JN helped me put together with parts he scrounged.  I am looking for Boatanchor Motif box to put all together.

If I connect my VFO and you and I do split freq 160m/75m do I qualify for OPWO status?



73
Bob
Logged

I'd rather be anatomically correct than politically correct!
KE1GF
Guest
« Reply #4 on: April 09, 2005, 01:17:07 PM »

Quote from: N9NEO
OSC I used is HP function generator.  I have a very nice Oscillator that JN helped me put together with parts he scrounged.  I am looking for Boatanchor Motif box to put all together.

If I connect my VFO and you and I do split freq 160m/75m do I qualify for OPWO status?



73
Bob


Bob I don't know for sure, I don't see why not. Maybe some of the elmer PWO's will read and give a difinitive answer.

Last night on Tom Vu and I had made plans to fire up our PW's on
75 around 3:30.

Maybe Tom has the 160M reception equipment to hear you. I have extremely bad line leakage interference with my dipole on 160M RX.

Hopefully this summer I'll be able to get CATV hardline and put up a 160 ANT way out in the woods away from the noise. And be prepared for operation next year.

-Bill
Logged
N9NEO
Member

Offline Offline

Posts: 284


« Reply #5 on: April 09, 2005, 03:11:36 PM »

Ok, I'm hookin up the JN matster oscillator for 160m.  I will try and xmit on 160m and recv on 75m.  Maybe JJ will be there to Knight me.

NEO-later
Bob
Logged

I'd rather be anatomically correct than politically correct!
N9NEO
Member

Offline Offline

Posts: 284


« Reply #6 on: April 09, 2005, 03:48:08 PM »

Ok, maybe some other time.  Pile of crap spread out over bench not co-operating, and I have 4 daughters together at same time and we are getting ready to go out to dinner.   #3 turned 19yo today, so special occasion.   Rather spend time with family for now.  We can make history later.

73
Bob
Logged

I'd rather be anatomically correct than politically correct!
KE1GF
Guest
« Reply #7 on: April 10, 2005, 02:26:13 AM »

yeah, we had a little pw session, Tom Vu, DUQ myself and others. I really could only hear tommy but did hear a bit from DUQ. there will be plenty of other weekends.

Catcha dude.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.051 seconds with 19 queries.