The AM Forum
April 26, 2024, 07:11:28 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Collins 32RA Parts Needed  (Read 1500 times)
0 Members and 1 Guest are viewing this topic.
Todd, KA1KAQ
Administrator
Member

Offline Offline

Posts: 4312


AMbassador
« on: September 28, 2017, 01:08:22 PM »
Received a note from a friend who needs some parts for his 32RA model 8 that was damaged in transit.

Parts needed so far are:

 - MODE Switch

 - CHANNEL Switch

 - Cabinet Rail that extends across the cabinet to hold modules in place.

If you have a clean cabinet, that might be a plus, too.

Collins made and sold a few gazillion of these beasts over a couple decades, so I'm guessing there should be some donor carcasses out there. If you have any of the above parts, please message me here or send an email to my call at gmail and I'll put you in touch with the party who is looking.

TNX

* 32RA_QST_jun1939_large.jpg (170.88 KB, 800x1167 - viewed 238 times.)
Logged
known as The Voice of Vermont in a previous life
Pages: [1]   Go Up
  Print  
The AM Forum  > AM CLASSIFIEDS > Wanted > Topic: Collins 32RA Parts Needed
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.034 seconds with 18 queries.