The AM Forum
May 04, 2024, 11:21:48 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: TX-2388A Choke specs needed  (Read 1297 times)
0 Members and 1 Guest are viewing this topic.
VE7EPP
Member

Offline Offline

Posts: 28

"oh, for the love of tubes and CW"


WWW
« on: October 25, 2015, 11:18:18 PM »
I have a Choke that I need to find the spec sheet on.  Can anyone point me to it?  I've looked and looked but can't find it.

The closes I can find is a previous ebay sale title that says that the XT2388A is a 4HY 165ma choke.  I also need to know the voltage rating. I believe it is a UTC.

I've attached two pictures.  One before I painted it and one after.  (I taped the model number and painted over the tape and wrote it on the bottom)  It is about 4.5" high and 3.75" across.

Any information is appreciated.

David VE7LE

* IMG_8541.JPG (115.35 KB, 640x480 - viewed 364 times.)

* IMG_8542.JPG (103.09 KB, 640x480 - viewed 375 times.)
Logged
"Why would anyone need more than one radio" (nonsensically uttered as a new ham with a new all-mode-all-band radio)
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: TX-2388A Choke specs needed
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.107 seconds with 18 queries.