The AM Forum
May 02, 2024, 04:57:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: How to Screen Modulate: Good 1965 Article  (Read 1687 times)
0 Members and 1 Guest are viewing this topic.
WA4WAX
Member

Offline Offline

Posts: 421
« on: October 17, 2015, 10:57:39 AM »
Several William Orr circuits here.  Also, the low down on that problematic Heath circuit.  12AU7's clean it up.

https://archive.org/stream/73-magazine-1965-09/09_September_1965#page/n2/mode/1up

Matt
Logged
DMOD
AC0OB - A Place where Thermionic Emitters Rule!
Contributing
Member
*
Offline Offline

Posts: 1770
« Reply #1 on: October 19, 2015, 03:17:25 PM »
If you are referring to the DX-35, it has always had 12AU7's as the screen modulator.

An improvement to audio is to remove the 0.05 uF cap across the 2.2 Meg resistor in the first 12AU7 stage and use a rolloff circuit on the cathode of the second stage 12AU7.


Phil - AC0OB


More upgrades here:

http://amfone.net/Amforum/index.php?topic=40779.0
Logged
Charlie Eppes: Dad would be so happy if we married a doctor.
Don Eppes: Yeah, well, Dad would be happy if I married someone with a pulse.NUMB3RS   Smiley
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: How to Screen Modulate: Good 1965 Article
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.031 seconds with 18 queries.