The AM Forum
December 02, 2024, 04:10:59 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Dakaware Knob Refurbishment  (Read 26446 times)
0 Members and 2 Guests are viewing this topic.
N6YW
Contributing
Member
*
Offline Offline

Posts: 458


WWW
« on: July 08, 2015, 02:09:08 PM »

I got around to working on a rather forlorn Johnson 250-23-3 Matchbox this week. It was given to me some years ago and had evidently been left out in the rain. The knobs had become quite bleached from the Sun.
I removed the knobs and the skirts from the two larger ones. I soaked them overnight in a mild natural kitchen soap which did a great job of removing all of the dirt and scum. Naturally, I removed all set screws first.
I laid the knobs out on several sheets of paper towels, then used a can of spray coconut oil that I use for cooking,
and sprayed a generous amount onto the knobs making sure they were completely coated.
This oil is obtained from Trader Joe's and it works VERY well. The idea is to impregnate the missing oils that would normally reside in the Bakelite. The result is a shiny beautiful finish that makes them look brand new. Seriously, they look fantastic and the bonus is the added aroma of Coconut. Smiley You have to rub on them with a towel to get all of the excess off but it's worth the effort. There may be other ways that are better but I used what I had on hand as an experiment and the result is very gratifying in as much as the knobs are now better looking than the rest of the tuner.
Now onto the task of getting the paint to look good.
73 de Billy N6YW
Logged

"Life is too short for QRP"
N6YW
Contributing
Member
*
Offline Offline

Posts: 458


WWW
« Reply #1 on: July 08, 2015, 03:09:54 PM »

This is the result.
I could have used a buffing wheel and rouge to get them nice and smooth before the oil treatment, but I don't have one set up yet as I just moved to Tucson in February and haven't had time to put my new shop completely together.
Enjoy.


* image1.JPG (314.29 KB, 1280x960 - viewed 1620 times.)

* image2.JPG (316.93 KB, 1280x960 - viewed 1655 times.)
Logged

"Life is too short for QRP"
W6ZKH
Member

Offline Offline

Posts: 61


« Reply #2 on: July 09, 2015, 01:32:51 PM »

Lookin' good, Billy..... maybe I should try that on my Valiants?  I picked up another yesterday and it is beautifully restored, recapped and retubed... I hate to say it, but I stole it, but yet I havent fired it up...waiting to install a fuse block and 3 wire cord tomorrow.  There is always something lurking that could go wrong.  Waiting for you to fire up that Bauer 707 too.. cu on 40 or 75 meters..

John W6ZKH
Logged

John W6ZKH
Cen CA
KB5MD
Contributing
Member
*
Offline Offline

Posts: 613


« Reply #3 on: August 02, 2015, 12:10:02 PM »

Something else to consider...remove the meter face, scan it and print a new one minus the stains and reinstall.  That will add a finishing touch to the nice knob job.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.041 seconds with 18 queries.