Need audio output transformer (for speak) of HRO receiver

[KO6YB]

Hello, I have an early HRO receiver wanting to bring to life again. This audio output transformer was located on the speaker. I need a suitable replacement transformer, do not have original speaker.

Recommended type TRIAD S-53X Universal Output for single ended tube
or equivalent. Would also accept fixed windings at or close to target values (see below) The output tube, by the way, is a 2A5.

Target values for transformer; 7000 ohm primary, 8 ohm secondary.

If you can help, let me know what you have, and cost. I am in central California.

Thanks, Stan