Opcom
Patrick J. / KD5OEI
Contributing
Member
Offline
Posts: 8267
|
|
« on: January 14, 2015, 11:33:20 PM » |
|
Are these still made? I don't seem to find a primary source only ebay and other secondaries.
|
|
|
Logged
|
Radio Candelstein - Flagship Station of the NRK Radio Network.
|
|
|
K1JJ
Contributing
Member
Offline
Posts: 8887
"Let's go kayaking, Tommy!" - Yaz
|
|
« Reply #1 on: January 15, 2015, 12:09:06 AM » |
|
I see Frank, K2AW is still listed on QRZ.
But I understand he no longer makes the sealed epoxy HV diode blocks. He was a great guy to deal with. He would send the parts out with just your promise to send a check. (Back when checks were used)
A good solution is to buy a bunch of 3A or 6A 1KV diodes. They're available from the big suppliers at good prices. Drill a Plexiglas sheet and mount them. I have a stack in my HV supply that has lasted for 20 years now,
T
|
|
|
Logged
|
Use an "AM Courtesy Filter" to limit transmit audio bandwidth +-4.5 KHz, +-6.0 KHz or +-8.0 KHz when needed. Easily done in DSP.
Wise Words : "I'm as old as I've ever been... and I'm as young as I'll ever be."
There's nothing like an old dog.
|
|
|
Pete, WA2CWA
Moderator
Member
Offline
Posts: 8092
CQ CQ CONTEST
|
|
« Reply #2 on: January 15, 2015, 03:54:12 AM » |
|
K2AW, Frank Fix, passed away some time back in 2005 or 2006. I believe, his daughter or some relative, was selling off the remaining stock after his passing.
|
|
|
Logged
|
Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
|
|
|
N2DTS
Contributing
Member
Offline
Posts: 2303
|
|
« Reply #3 on: January 15, 2015, 08:34:55 AM » |
|
|
|
|
Logged
|
|
|
|
KL7OF
Member
Offline
Posts: 2310
|
|
« Reply #4 on: January 15, 2015, 08:46:10 AM » |
|
what kind of diodes did Frank use in those epoxy sealed mounts? I wonder where he got the mounts? I have been using them for years and they are (almost) bullet proof....I always hoped that someone would pick up the ball after Frank quit and make them available again......
|
|
|
Logged
|
|
|
|
W1ITT
Member
Offline
Posts: 572
|
|
« Reply #5 on: January 15, 2015, 08:57:26 AM » |
|
Frank used to call his business "K2AW Silicon Alley". He was a "regular guy" and a frequent vendor at Hosstraders swapfest back in the Deerfield days. There were more people building big amplifiers back then and he did a brisk trade. I dealt with him both in person and through the mail. He advertised in a couple of the ham magazines back then. I don't know if there's enough business for someone to take up the slack, but I see that one of the Ebay guys referenced earlier is shipping product from China. With the better diodes we have today, perhaps some of the 1 Kv, 6 Amp diodes could be potted up in strings and sold to those who prefer to measure voltage in kilovolts.
|
|
|
Logged
|
|
|
|
W3GMS
Contributing
Member
Offline
Posts: 3043
|
|
« Reply #6 on: January 15, 2015, 09:09:42 AM » |
|
what kind of diodes did Frank use in those epoxy sealed mounts? I wonder where he got the mounts? I have been using them for years and they are (almost) bullet proof....I always hoped that someone would pick up the ball after Frank quit and make them available again......
I met Frank many years ago when we both had booths near one another in the Hara Arena at Dayton. From what I remember, Frank told me that he worked for General Instrument. When he retired he set up a business to buy cosmetic flaws rectifier blocks from them. That became what we knew as a K2AW rectifier. One year during the overnight, Frank's booth was raided and a lot of his inventory was stolen. He was heartbroken that anyone would do that. That was a very rare thing to happen in the arena. Frank and his wife were great folks. I will never forget meeting him on I-95 when he delivered his old NC-100 to me. Frank was up in years then, so he had a very long and fun life by all accounts. Joe-W3GMS
|
|
|
Logged
|
Simplicity is the Elegance of Design---W3GMS
|
|
|
Pete, WA2CWA
Moderator
Member
Offline
Posts: 8092
CQ CQ CONTEST
|
|
« Reply #7 on: January 15, 2015, 02:20:15 PM » |
|
|
|
|
Logged
|
Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
|
|
|
N2DTS
Contributing
Member
Offline
Posts: 2303
|
|
« Reply #8 on: January 15, 2015, 03:37:07 PM » |
|
These are the ones I got: http://www.ebay.com/itm/400478936537?_trksid=p2060778.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AITThey came in a sealed bag inside a box (each one) and the originals sold for $20.00 each I think. Shipped from the US, have no idea where they were made. I have a bunch of the K2AW ones, but used to blow them out in the negative cycle loading setup in the big rig all the time. They were not fast enough in the NCL circuit and I had reports I was very wide back then. I got a bunch of 1200 volt 3 amp diodes of ebay cheap a few weeks ago...they are quite large...
|
|
|
Logged
|
|
|
|
Pete, WA2CWA
Moderator
Member
Offline
Posts: 8092
CQ CQ CONTEST
|
|
« Reply #9 on: January 15, 2015, 03:48:08 PM » |
|
On the site link I provided, it looks like the prices are roughly half and if you're not in a hurry, they provide free shipping. If you poke around their web site, they have a number of diode stacks.
|
|
|
Logged
|
Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
|
|
|
John K5PRO
Member
Offline
Posts: 1026
|
|
« Reply #10 on: January 15, 2015, 03:52:18 PM » |
|
Dean Technology, aka, High Voltage Components Associates and CKE, make some very nice HV rectifiers, look for the glass passivated epoxy blocks online on their site.
|
|
|
Logged
|
|
|
|
W9GT
Member
Offline
Posts: 1240
Nipper - Manager of K9 Affairs
|
|
« Reply #11 on: January 15, 2015, 06:00:38 PM » |
|
I suppose I was under the impression that there was something magic about those K2AW units and not that they were just "repackaged" series-connected regular diodes. Fact is that they were very popular and well made and provided in useful and rugged configurations. I wonder if the diodes were specially selected or matched? I also always wondered if they had equalizing resistors in the molded housings across the diodes? I never tore one apart. 73, Jack, W9GT
|
|
|
Logged
|
Tubes and Black Wrinkle Rule!! 73, Jack, W9GT
|
|
|
N2DTS
Contributing
Member
Offline
Posts: 2303
|
|
« Reply #12 on: January 15, 2015, 07:24:23 PM » |
|
I have some fried ones, maybe I will cut one open with a hack saw. Frank used to sell at all the fests, the diode table...
|
|
|
Logged
|
|
|
|
w1vtp
Member
Offline
Posts: 2632
|
|
« Reply #13 on: January 15, 2015, 08:48:49 PM » |
|
I have a couple of those diodes. Rosie is checking that one out to see if it moves.
|
|
|
Logged
|
|
|
|
Opcom
Patrick J. / KD5OEI
Contributing
Member
Offline
Posts: 8267
|
|
« Reply #14 on: January 15, 2015, 09:21:32 PM » |
|
I have a couple of those diodes. Rosie is checking that one out to see if it moves.
I saw something like that yesterday. Sawing on in half is good. If anyone has an X-ray machine handy, that would be a way to find out even more.
|
|
|
Logged
|
Radio Candelstein - Flagship Station of the NRK Radio Network.
|
|
|
Pete, WA2CWA
Moderator
Member
Offline
Posts: 8092
CQ CQ CONTEST
|
|
« Reply #15 on: January 15, 2015, 10:08:22 PM » |
|
Why do we care
|
|
|
Logged
|
Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
|
|
|
N2DTS
Contributing
Member
Offline
Posts: 2303
|
|
« Reply #16 on: January 15, 2015, 11:10:03 PM » |
|
We need to know. Why do we care
|
|
|
Logged
|
|
|
|
N2DTS
Contributing
Member
Offline
Posts: 2303
|
|
« Reply #17 on: January 15, 2015, 11:16:11 PM » |
|
I just looked, I must have got rid of the blown ones, but found I have quite a bunch of good ones. The new ones are 16KV, the old ones were 14 KV. Looking at the area you could put stuff in, its very small....
|
|
|
Logged
|
|
|
|
Opcom
Patrick J. / KD5OEI
Contributing
Member
Offline
Posts: 8267
|
|
« Reply #18 on: January 16, 2015, 12:22:39 AM » |
|
Why we care:
Vger requires the information. The carbon units will supply the information.
(edit for clarity)
|
|
|
Logged
|
Radio Candelstein - Flagship Station of the NRK Radio Network.
|
|
|
W3RSW
Contributing
Member
Offline
Posts: 3307
Rick & "Roosevelt"
|
|
« Reply #19 on: January 16, 2015, 08:26:01 AM » |
|
Always thought he was one of the meats. Great costume and make up if not. Those intellig-feel, tm. whiskers H'ain't cheap either.
|
|
|
Logged
|
RICK *W3RSW*
|
|
|
N2DTS
Contributing
Member
Offline
Posts: 2303
|
|
« Reply #20 on: January 16, 2015, 09:33:21 AM » |
|
Have you mixed up your meds again? Always thought he was one of the meats. Great costume and make up if not. Those intellig-feel, tm. whiskers H'ain't cheap either.
|
|
|
Logged
|
|
|
|
|