The AM Forum
May 07, 2024, 02:35:48 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Viking II working now.  (Read 2260 times)
0 Members and 1 Guest are viewing this topic.
W6MQI
Member

Offline Offline

Posts: 65


« on: August 11, 2013, 01:50:52 AM »

 Well so far the Viking II seems to be working after thinking I had a shorted T2. T2 was getting so hot one could have fried an egg on it I mean smokin HOT! Seems the previous owner installed a PTT system which looked to be a half way decent install. Come to find out there was a pinched wire underneath a standoff which grounded the bias side of T2 the PTT was taking power from this side of T2 to power the PTT relay. I looked in this area several times and never saw anything until I decided to remove the PTT system and bingo! there it was. Sure hope there wasn't any other damage done by this short especially T2  I think I'll keep the Viking on the bench for awhile and monitor things before the covers go back on.

Dave.
Logged
KB2WIG
Contributing
Member
*
Offline Offline

Posts: 4467



« Reply #1 on: August 11, 2013, 06:16:35 PM »

D,,

 Fuse both transformers and sleep easier.
 

IM(un)HO,
klc
Logged

What? Me worry?
W6MQI
Member

Offline Offline

Posts: 65


« Reply #2 on: August 11, 2013, 11:00:16 PM »

D,,

 Fuse both transformers and sleep easier.
 

IM(un)HO,
klc

Yes I agree.  Wink
Logged
KI4THX
El' Guappo Ernesto
Member

Offline Offline

Posts: 57


It's 106 Miles To Chicago, We Got A Full Tank Of G


« Reply #3 on: August 12, 2013, 03:18:44 AM »

Aye, I smoked a Vike II HV tranny two nights ago....no fusing....sigh.
Logged

It's 106 Miles To Chicago, We Got A Full Tank Of Gas, Half A Pack Of Cigarettes, It's Dark And We're Wearing Sunglasses.

HIT IT !
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 18 queries.