The AM Forum
April 29, 2024, 09:24:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Viking II shunts SH1, SH2?  (Read 2011 times)
0 Members and 1 Guest are viewing this topic.
W6MQI
Member

Offline Offline

Posts: 65
« on: August 11, 2013, 11:23:30 PM »
Okay dumb question are these the shunt resistors SH1, and SH2. Can't seem to find them except for on X22 pins 4, 5, 6 there are two black wires that are bent in a U shape extending out from X22 then bent back 180 degs toward X22.  See picture

* 20130811_201418.jpg (166.71 KB, 640x480 - viewed 425 times.)
Logged
N8ETQ
Member

Offline Offline

Posts: 795


Mort
« Reply #1 on: August 11, 2013, 11:52:23 PM »

  That's them.. a measured length of "Ni-chrome" wire.
The portion of "Solder free" wire should be the as specified
in the assembly manual.  Mouser has "real" resistors
you could use.  Make sure all meter connections are
clean and tight.

GL OM

/Dan
Logged
W6MQI
Member

Offline Offline

Posts: 65
« Reply #2 on: August 12, 2013, 12:59:22 AM »
Right on! thanks Dan.

73,Dave
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Viking II shunts SH1, SH2?
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.06 seconds with 19 queries.