The AM Forum
April 29, 2024, 12:52:03 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Specs on Hammond 192C choke  (Read 1716 times)
0 Members and 1 Guest are viewing this topic.
VA3AEX
Contributing
Member
*
Offline Offline

Posts: 77
« on: June 04, 2013, 04:22:33 PM »
Anyone know the specs on a Hammond 192C choke?  Its not listed in 1974 Hammond catalogue on the Bunker of Doom web page.  Its a shielded choke about 3 1/2"x 2 1/2" x 2 1/2" (T x W x D).   

73  Alex
Logged
VE3AJM
Member

Offline Offline

Posts: 378
« Reply #1 on: June 05, 2013, 07:00:57 AM »
Hi Alex

Heres the information on the choke from the 1957 Hammond catalogue.
Good to see you at the Cambridge hamfest last Sunday.

Al VE3AJM
* scan0027.pdf (262.79 KB - downloaded 157 times.)
Logged
VA3AEX
Contributing
Member
*
Offline Offline

Posts: 77
« Reply #2 on: June 05, 2013, 07:39:21 AM »
Thanks Al, low value means I won't be using it in my next power supply.  Wondered why it was so clean after spending some time in my junk box.

Good to get to the 'fest and see some fellow AMers!

73 Alex
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Specs on Hammond 192C choke
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.049 seconds with 18 queries.