The AM Forum
May 07, 2024, 09:26:50 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: FT-102 sound  (Read 1801 times)
0 Members and 1 Guest are viewing this topic.
Chuck k3xu
Member

Offline Offline

Posts: 25
« on: May 15, 2013, 12:32:53 PM »
What mic did Bill DUQ run on his FT-102?
I'm trying to get the lash up correct.
thanks
Logged
W3GMS
Contributing
Member
*
Offline Offline

Posts: 3042
« Reply #1 on: May 15, 2013, 04:29:35 PM »
Chuck,
It was a vintage condenser mic but I just can't remember the model number.  He ran that Mic for a very long time.  He is up at the Hickory House and I am sure would gladly let you know which one he used. 
It was not a mic going right into the rig.  He did have an outboard audio chain to go along with the mic.
Joe, GMS   
Logged
Simplicity is the Elegance of Design---W3GMS
Chuck k3xu
Member

Offline Offline

Posts: 25
« Reply #2 on: May 15, 2013, 06:08:42 PM »
Thanks for the info Joe.This 102 was Bill's rig.I tried a Behringer EQ and it was overdriving it.I tried a D104 and had good reports on the audio.
email me if you would like to know how I rescued this radio from a flipper.
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: FT-102 sound
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.049 seconds with 18 queries.