The AM Forum
May 03, 2024, 05:47:11 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Thanks  (Read 1488 times)
0 Members and 1 Guest are viewing this topic.
N3PDT
Member

Offline Offline

Posts: 29


« on: January 22, 2013, 12:52:40 AM »

Just a quick thank you to all who offered help a few weeks back on my Johnson Viking II. It's on the air now getting good reports on both AM phone and CW. Still have a thing or two to tweak, but it's been a great learning platform and sparked me to get a lot more serious about the technical side of things. One of our club's electronics gurus (and incidentally, a former instructor) has taken me under his wing, and I have been trying to soak it all in as fast as I can.

Thanks again.

Doug N3PDT
Logged
W3GMS
Contributing
Member
*
Offline Offline

Posts: 3068



« Reply #1 on: January 22, 2013, 08:21:21 AM »

Doug,

Glad you got it back up and running, plus you learned a lot in the process!  I was following your progress and obviously the help you got on Amfone was stellar.  Lots of knowledge here and most are glad to help others.  As you have found, its good to have a local mentor as well.  Now your ready to tackle other technical challenge! 

I hope to work you on the Viking 2 or the 5100.  Both are great transmitters which I am sure you will enjoy. 

Joe, W3GMS
Logged

Simplicity is the Elegance of Design---W3GMS
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.069 seconds with 18 queries.