Steve - K4HX
Administrator
Member
Offline
Posts: 2722
|
|
« on: December 16, 2012, 12:51:44 PM » |
|
Quick and Dirty SP-600 Audio Modifications
by
Chuck Rippel, WA4HHG
Change C141 and C142 to 100 pF, polystyrene.
Change C143 to a 0.01 uF, polystyrene.
Change C148 to a 0.01 uF, polyester.
Change C149 to a 10 uF, electrolytic.
Change C151 to a 20-30 uF, electrolytic.
Add a 0.01 uF, 630 V off the bottom of the primary of the output transformer to ground.
Change R62, R63, R64, R65, R81, R82, R83, R98, R99 to metal film types.
|