The AM Forum
May 01, 2024, 01:39:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: FS: Type 8560 ceramic tetrodes  (Read 1736 times)
0 Members and 1 Guest are viewing this topic.
W8ACR
Contributing
Member
*
Offline Offline

Posts: 729


254W


« on: December 03, 2012, 11:57:31 PM »

For sale: Three 8560 ceramic tetrodes. Two are Motorola and one is Amperex. I think they are all NOS, but the Amperex has some tarnishing and may be used. These are electrically equivalent (or at least very close) to 4CX250B's. However they have no cooling fins on the plate structure since they are designed to be cooled by heat sinking rather than air flow. The Eimac literature that I saw said that their plate dissipation rating is limited only by the effectiveness of the heat sink. Kinda cool lookin' tubes. Maybe someone out there can put 'em to use. $50.00 for all three shipping included.

Ron W8ACR
skipperfam@gondtc.com


* 8560 001.jpg (1461.66 KB, 2048x1536 - viewed 482 times.)

* 8560 002.jpg (1389.2 KB, 2048x1536 - viewed 458 times.)
Logged

The life of the nation is secure only while the nation is honest, truthful and virtuous. Frederick Douglass
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.065 seconds with 18 queries.