The AM Forum
April 29, 2024, 11:25:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: link coupled tank circuit to coax  (Read 1792 times)
0 Members and 1 Guest are viewing this topic.
kb3ouk
Member

Offline Offline

Posts: 1640

The Voice of Fulton County
« on: November 05, 2012, 03:45:30 PM »
How do you attach a link coupled output to coax? I've saw two methods, one where just the coil is attached to the center and shield of the coax, then another where center of the coax is connected to one ed and the other end is connected to a variable cap to ground
Logged
Clarke's Second Law: The only way of discovering the limits of the possible is by venturing a little past them into the impossible
Steve - K4HX
Administrator
Member

Offline Offline

Posts: 2727
« Reply #1 on: November 05, 2012, 04:07:55 PM »
I've seen both, done the first. The second give you another adjustment to make a good match.

http://amfone.net/Amforum/index.php?topic=32269.msg250621#msg250621
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: link coupled tank circuit to coax
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.043 seconds with 19 queries.