|
Title: link coupled tank circuit to coax Post by: kb3ouk on November 05, 2012, 03:45:30 PM How do you attach a link coupled output to coax? I've saw two methods, one where just the coil is attached to the center and shield of the coax, then another where center of the coax is connected to one ed and the other end is connected to a variable cap to ground
Title: Re: link coupled tank circuit to coax Post by: Steve - K4HX on November 05, 2012, 04:07:55 PM I've seen both, done the first. The second give you another adjustment to make a good match. AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
http://amfone.net/Amforum/index.php?topic=32269.msg250621#msg250621 |