The AM Forum
May 05, 2024, 01:20:31 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: HRO-60 OSC trim knob  (Read 1843 times)
0 Members and 1 Guest are viewing this topic.
K6JEK
Contributing
Member
*
Offline Offline

Posts: 1188


RF in the shack
« on: July 30, 2012, 03:56:45 PM »
How should the the OSC knob be relative to the variable cap?  The alignment procedure calls for the arrow pointing straight up. Half meshed is what I figured this meant but on the one I'm working on, that's fully meshed.

Thanks,

Jon
Logged
Jim, W5JO
Member

Offline Offline

Posts: 2503
« Reply #1 on: July 30, 2012, 05:41:01 PM »
It has been changed.  1/2 mesh and the arrow should point up.
Logged
K6JEK
Contributing
Member
*
Offline Offline

Posts: 1188


RF in the shack
« Reply #2 on: July 31, 2012, 12:01:31 AM »
Quote from: Jim, W5JO on July 30, 2012, 05:41:01 PM
It has been changed.  1/2 mesh and the arrow should point up.
Just as I suspected.  Thanks
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: HRO-60 OSC trim knob
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 18 queries.