Joe,
Are you sure you made the pad thick enough?? Looks like it could hold up a 5 story building.
Nice job and you're right, we're all getting too old for such big heavy projects.
Fred
Thanks Fred, I like to only do those jobs once! I feel sorry for whoever gets this house next and wants to remove the building and foundation!
Joe, GMS
I'm going to pour a six-by-six concrete pad to mount a small structure, so I need an education about cement and small building mounts.
The second picture is me raking out the concrete.
You can see the technique that I use for building pads.
Joe,
Wow! What a man!
The more I research the possibilities, the more tempted I am to change "Do it yourself' to "Call someone else"!
Thanks for showing me that it is possible to do it well, and by myself.
73,
Bill, W1AC
Bill,
Your pad is small in comparison. Just level your ground out and get some 2X8 framing lumber and frame it out. Put some supports around it to keep it from bowing when you do the pour. Put a vapor barrier down and for that I like using the heavier grade of roofing felt pape and I overlap and tape the seams. On top of that put about an inch of crushed stone along with some re-bar supports to keep the rebar suspended in the mix and then I wire tie grid wire to the rebar. You can get some small opening fence wire in small quantities at the big box stores that would work for a pad your size. I would use at 3000 mix. Around here its easy to find firms that will sell you a metered mix based on what you use. So your small quantity should not be a problem.
Farming it out is no guarantee that it would be done correctly. I have seen some very shoddy work by those that should know better.
Good luck!
Joe, GMS